Drc-10

The DRC10 is a general IO board that communicates through the standard RS-232 port. It is designed for controlling external pumps, valves, etc. in Flow Injection Analysis and Sequential Injection Analysis systems. All functionality is controlled by a 22 MHz microprocessor specifically programmed to acquire data from two 12 bit analog input channels, and to control a wide variety of external peripherals. The microprocessor communicates to a host computer using a simple ASCII command set. This allows the DRC10 to interface to most computer and operating system platforms, including PC-DOS, Windows, Macintosh, etc. The DRC10 is recognized by our spectrophotometer software, making external control immediately available.

Features

On-board Microprocessor.
Simple RS-232 interface to PC.
Macro command language driven.
Microsecond timing accuracy.
Direct control for Alitea, Cavro, and Valco components.
Compatible with the ProSpectra spectrophotometer.
Battery Ready! Can be configured to operate on 2 AA batteries!

Specifications

2 12 bit analog inputs 0-10 volt.
2 8 bit analog outputs 0-10 volt or 0-20 mA.
8 TTL level inputs.
8 TTL level outputs.
External RS-485 port.
Optional 5 additional 12 bit analog inputs.
Optional 16 additional TTL I/O lines.
Prices start at $2,195.